Ripstar Saturant

उत्पाद वर्णन

Apply first coat of fully mixed RIPSTAR Saturant to primed concrete substrate using roller or brush. Place the RIPSTAR fiber sheet and roll in the longitudinal direction of the fibers two or three times using a deforming roller and rubber spatula in order to impregnate the resin into the fibers and to deform the resin coat. For joining strips of fiber sheet, a 15 cm overlap length is required in the main direction. The additional resin must be applied at the overlap location on top of the outer layer of fiber sheet to be overlapped. Apply the second coat of RIPSTAR Saturant ensuring total saturation of the RIPSTAR fiber sheets. Where more than one layer of fiber sheet is to be applied, the above application method for RIPSTAR Saturant should be repeated. In case of protection with plaster, ensure to dry-shake oven-dried fine quartz grains to assist bond strength with overlay.